American Bass HAWK Slim 10 Package | 10" 1500W D2 Subwoofer & Orion CBA4500.2 Amplifier

Sub & Amp Package Deal

(1) American Bass HAWK Slim 10 Inch 1500W DVC 2 Ohm Subwoofer | HAWKLIM1022

(1) Orion Cobalt 4500W Max 2 Channel Full Range Amplifier | CBA4500.2

*This setup is intended to run at 4 Ohms Bridged

You have a truck. You have a lot of power. But you don’t have a lot of space or bass. That’s why you need the American Bass Hawk Slim subwoofer. This subwoofer is so slim, you can squeeze it in any corner or crevice of your truck. But it’s not slim on sound. This subwoofer has magnets with vented cooling to keep it blasting and booming. It has high power 4 layers aluminum former voice coil to give it sharp and clear sound. It has high density foam surround and high quality spider suspension system to make it sturdy and steady. The American Bass Hawk Slim subwoofer will make your truck sound awesome with its deep and solid bass. Don’t let your space limit your sound. Get the American Bass Hawk Slim now.

Also Known As: HAWKSLIM1022 / HAWK-SLIM10D2 / HAWK-1022SL / HKS1022

Subwoofer Details:

• MAX Power Handling: 1500W
• RMS Power Handling: 700W
• Impedance: DVC 2 Ohm
• Sensitivity: 84.3 dB
• Mounting Depth: 3.15"
• Cutout Diameter: 9.25"
• Weight: 17 lbs.
• 2.75" 4-Layer Aluminum Voice Coil
• 80oz High-Energy Magnet Structure w/ Venting
• High Density Foam Surround
• High Quality Spider Suspension Assembly 
• Gloss Black Stamped Steel Basket
• Recommended Ported Box Size: 0.6 - 0.9 Cubic Feet
• Owner's Manual / Spec Sheet

Amplifier Details:

• 4500W Peak Rating
• 300W RMS X 2 @ 2 Ohms
• 125W RMS X 2 @ 4 Ohms
• 600W RMS X 1 @ 4 Ohms Bridged
• Frequency Response: 10Hz - 30kHz
• High Pass Crossover Continuously Variable: 50 - 1.2kHz
• Low Pass Crossover Continuously Variable: 40 - 250Hz
• Supply Voltage: 10 - 16V
• Input Impedance: 22k Ohm
• Signal to Noise Ratio: >90 dB
• Variable Bass Boost: 0 - 12dB
• Variable Input Level Control: 0.2V - 6.0V
• Fuse Rating: 60A (2 x 30A ATC)
• Positive Terminals: 1 x 4 AWG
• Negative Terminals: 1 x 4 AWG
• Remote Turn-On Signal: 10 AWG
• Speaker Output Terminals: 10 AWG
• Dimensions: 12.28" x 7.09" x 2.13"
• Weight (Approx.): 5 lbs.
• All MOSFET Power Supply & Output Stage
• Heavy Gauge / High Current Custom Power and Speaker Terminals
• 2-Ohm Stable
• RCA Out Throughput
• 12dB Octave Low-Pass Filter
• Electronic Crossover Network
• Bass Boost Circuit
• Intelligent Power and Protection LED Indicator
• Soft Turn-on/Turn-off
• Turn-On Delay
• Fault and Protection Monitoring
• 4-Way Protection: Thermal, DC offset, Short Protection, Under & Over Voltage

Shop For Wiring & Batteries

Shop for Subwoofer Boxes

Browse Custom Box Builders

Please feel free to send us a message if you have any questions about this package.