American Bass HAWK Slim 10 Package | 10" 1500W D4 Subwoofer & Orion XTR1000.1D Amplifier

Sub & Amp Package Deal

(1) American Bass HAWK Slim 10 Inch 1500W DVC 4 Ohm Subwoofer | HAWKLIM1044

(1) Orion XTR 1000W RMS Monoblock Subwoofer Amplifier | XTR1000.1D

*This setup is intended to run at 2 Ohms

You have a truck. You have a lot of power. But you don’t have a lot of space or bass. That’s why you need the American Bass Hawk Slim subwoofer. This subwoofer is so slim, you can squeeze it in any corner or crevice of your truck. But it’s not slim on sound. This subwoofer has magnets with vented cooling to keep it blasting and booming. It has high power 4 layers aluminum former voice coil to give it sharp and clear sound. It has high density foam surround and high quality spider suspension system to make it sturdy and steady. The American Bass Hawk Slim subwoofer will make your truck sound awesome with its deep and solid bass. Don’t let your space limit your sound. Get the American Bass Hawk Slim now.

Also Known As: HAWKSLIM1022 / HAWK-SLIM10D2 / HAWK-1022SL / HKS1022

Subwoofer Details:

• MAX Power Handling: 1500W
• RMS Power Handling: 700W
• Impedance: DVC 2 Ohm
• Sensitivity: 84.3 dB
• Mounting Depth: 3.15"
• Cutout Diameter: 9.25"
• Weight: 17 lbs.
• 2.75" 4-Layer Aluminum Voice Coil
• 80oz High-Energy Magnet Structure w/ Venting
• High Density Foam Surround
• High Quality Spider Suspension Assembly 
• Gloss Black Stamped Steel Basket
• Recommended Ported Box Size: 0.6 - 0.9 Cubic Feet
• Owner's Manual / Spec Sheet

Amplifier Details:

• 1080W RMS X 1 @ 1 Ohm
• 790W RMS X 1 @ 2 Ohms
• 510W RMS X 1 @ 4 Ohms
• Frequency Response: 15Hz - 250Hz
• Linear Bandwidth: 15Hz to 250Hz +/- 3 dB
• Low Pass Crossover: 30Hz - 300Hz
• Supply Voltage: 9 - 16V
• Amplifier Efficiency: >80%
• Damping Factor: 200dB
• Signal to Noise Ratio: >90dB
• T.H.D. & Noise: 0.5%
• Phase Shift: 0 - 180
• Variable Bass Boost: 0-18dB
• Subsonic Filter: 10 - 25Hz
• Variable Input Level Control: 0.2V - 6.0V
• Fuse Rating: 100A External (not included)
• Positive Terminals: 1 x 4 AWG
• Negative Terminals: 1 x 4 AWG
• Remote Turn-On Signal: 12 AWG
• Speaker Output Terminals: 12 AWG
• Dimensions: 8.66" x 9.25" x 2.75"
• Weight (Approx.): 7.3 lbs.
• All MOSFET Power Supply & Output Stage
• Heavy Gauge / High Current Custom Power and Speaker Terminals
• 12dB Octave Low-Pass Filter
• Remote Gain Controller Included
• Electronic Crossover Network
• Bass Boost Circuit
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off Turn-On Delay
• Fault and Protection Monitoring
• 4-Way Protection: Thermal, DC offset, Short Protection, Under & Over Voltage

Shop For Wiring & Batteries

Shop for Subwoofer Boxes

Browse Custom Box Builders

Please feel free to send us a message if you have any questions about this package.